Solder Paste Inspection Machine
Automatic Solder Paste Printer
SMT Lead Free Reflow Oven Machine
DIP Lead Free Wave Soldering Machine
SMT Peripheral Equipments
Address:Guang sheng rong Industrial park, No.94 ,Guangtian Road, Songgang Street, Bao’an District, Shenzhen China
Solder pot type
Matrix straight heating, heating efficiency up to 95%
PCB convey height
Solder pot temp.
Room temp.~350℃, accuracy ±1-2℃
Solder pot temp. accuracy
Strong titanium finger/customized
Component height limit
Solder bar adding way
Wave height range
0~18mm keep steady
2 (dual waves)
Flux adding way
Left to right
Flux flow rate
Step motor+A-100 nozzle
Room temp.~250℃ (adjustable)
Tray to collect
3P 5 wires 380V/3P 220V
Solder bar type
Solder pot power
Normal running power
Solder pot capacity
Solder pot material
Streamline cover design, the frame is made of thick square tube, the cover is made of 2mm steel plate. There are totally 6 wheels to move the machine easily.
Front door structure
Fully enclosed glass door, transparent，pneumatic holder to support, ensure the operating and repairing space.
Painted with white color
Spray range:20~65mm,adjustable，nozzle height: 50~80mm adjustable，max. flow rate:100ml／min
Acid and alkali resistant air pipe, the brand is SMC from Japan.
Nozzle moving system
Step motor to drive, Mitsubishi PLC, with proximity switch and entrance sensor to control, according to the coming PCB’s speed and width, the spraying system can detect and starts to work.
Flux recycle system
Tray to hold the waste water and flux, can be draw out easily, make maintenance very convenient.
Flux exhaust system
Exhaust system：stainless steel mesh frame+ double layers filter，recycle the flux to maximum.
Isolated air curtain
Air pressure type knife, blow the redundant flux into the recycling box, to avoid the flux to enter into the preheating zones, ensures the safety.
Spraying box structure
Made of full stainless steel, easy to clean and repair. Anti-corrosion, very durable.
Preheating zone quan.
Preheating length is 1800mm, divided into 4 sections, supply abundant adjusting space, very good for big PCB and complicated PCB. Reduce the heat impact on PCB, improve the production efficiency.
Temp. control method
Mitsubishi temp. collecting module, PID is very precise and stable.
The heaters are imported from Taiwan, heat up very fast, with long life, small thermo lag; The heat is even in the zones.
The heating module adopts drawer design, easy to replace and repair, make the maintenance very convenient.
Made of aluminum, wear resistant and without distortion.
Width adjusting accuracy less than 0.2mm
C/V speed setting unit
C/V speed variation range
Electric closed-loop control, within 0-10mm／min
Panasonic motor from Japan
Low oxidization design
High quality solder pot, the heat is very steady. Adopts liquid solder flow design, reduce the impact oxidization, especially for small PCB.
Reduce the power consumption
Wave adjustable height
TCG motor from Taiwan，adjust the wave height with frequency conversion.
Adopts the stainless steel heaters from Taiwan, with long life and power saving up to 40% daily.
Adopts high power centrifugal fan, reduce the air bubble and solder pad stripping
Automatic finger cleaning
Imported premium pump, can wash the fingers from both sides. Propyl alcohol to clean and can be recycled.
★Automatic alarm function for failure:：thermocouple abnormal，temp. too high or too low；if preheating system or solder pot is abnormal, the heating stops.
★Preheating temp., solder pot temp., conveyor speed, spraying and cooling can be controlled separately.
★One week automatic power on/off setting （three times one day）
★The emergency stops are in front, rear of the machine, press them in case of any emergency.